Auto 5 Ply Corrugated Production Line 5 Layer Line Corrugated Carton Machine
Buyer supply apart:
Air compressor,air pipe line and e pipeline
1. Main power, electric wire from operate box to main power
2. Water supply, pipeline and barrel
3. Water, electric and gas, main ground foundation
4. Test machine use Raw materials ( paper roll, corn starch, caustic soda, sodium borax) to test
machinery
5. Machine use oil, lubricate oil,high temperature cream and lubricate oil
6. Installing engineer's food, hotel,commission and supply enough workers to help installing and test
machine.
7. Boiler 2T supply by customer and the pressure 1.25Mpa and the working pressure is 0.8~1.1Mpa.
Machine intruction:
1. RSH_V5 Hydraulic mill roll stand:This machine is used for supporting the paper roll, supply the paper to the production line.
2. SF-A15 Single facer: Single facer is design for producing single-face corrugated paper
3. OBH conveying bridge:
Main frame made by channel steel, and angle steel
With protecting handrail and safety pedal on both sides, the operation side is installed with safety
ladder, to make sure the safety and convenience of the worker
Vacuum suction tension control,5 inch suction pipe with adjusting valve,draw fan power can be
adjusted freely
Electric correcting, and correcting plate is by double guide posts,driving by screw, fast and
accuracy to position, steady to move
Take up device two sets, installed on each single facer
Independent frequency motor lifting device, PVC conveyor belt transmission, corrugated
paperboard forward wave and smoothly
PH-90 preheater:
This machine is used for heating liner (pre-heating for raw paper), and dry to control temperature and humidity
Electric to adjust the wrap angle, preheating area can be in 360° range
butterfly seal structure on two sides,saving the steam and improving heating efficiency
Soft siphon style structure,making the drainage more thoroughly
All the surfaces of rollers have been accurate ground and plating chromed
Note: The roll paper which is used to test the production line speed should meet following requirements:
| Grade | Min. B |
| Moisture content | 11% ± 2% |
| Face paper | 100~250g/m2 |
| Liner paper | 100~250g/m2 |
| Corrugated paper | 100- 200g/m2 |
| Flute profiles | A,B,C flute |
| Steam requirements | 8-10Kg |
| Steam consumption | 2500kg/h |
| Air compressor pressure | 0.8~1.1Mpa |
| Electricity | 380V, 50Hz,three-phase four wire type |
| Equipment Direction | Left or Right transmission will be according to client's requirements |
| Factory request size | Specific length as to the foundation of drawing |
Product Tags:
|
|
5 Layer Line Corrugated Carton 180m / Min Automatic Corrugation Machine Images
|
